For tile repairs we suggest using Mix2Match TileFix. The pigments in each Mix2Match Repair Kit can be used as a touch up paint in cracks and crevasses, however you will need to make sure to add in the lacquer to your tint mixture. The pigments by themselves will not stand up to surface traffic. How long the repair will last is dependent on many factors, including the traffic level of the area and on whether the repair is slightly recessed or not. However we have found repairs to last many years with normal wear and tear. tile floor.

How long the repair will last is dependent on many factors, including the traffic level of the area and on whether the repair is slightly recessed or not. However, we have found repairs to last many years with normal wear and tear.

TileFix is a great repair solution for tile floors. Providing the instructions are followed, it will dry as hard as the floor.

Yes, this incluses tiles made from materials such as granite, marble, formica, ceramic, wilsonart, etc.

The lacquer seals the repair making the repair durable and less susceptible to traffic, maintenance, and moisture, while giving it a nice finish. Layers of lacquer can help better match different sheen levels in a floor.

Warm water will clean up excess putty, if the putty has hardened and water cleanup is not preferred, you can scrape the excess away.

The Mix2Match TileFix Kit is a great solution for marble repair, however, please note that it is not intended for use in high water areas such as the water-line or below on tubs.

How much this kit can repair is dependent on the length, width, and depth of the damage. The damaged area will need to be deep enough for putty to stick to. While there is enough putty in one tube to do about a 5"x4" repair (at minimum 1/16" deep), we don't recommend much larger than an inch by an inch. This is because it becomes difficult to disguise a repair bigger than that. The pigments are enough for multiple repairs as they are highly pigmented. Should you require more putty, please contact us.

You mix the color into the putty. However if you are filling a deep hole you can pre-fill the hole with putty and then cover the top portion with a putty tint mixture.

Repairs completely dry within 8-12 hours, however you can speed this up by using a blow dryer or heat gun. Allow to fully cure (2-3 days) before heavy use.

Repairs completely dry within 8-12 hours, however you can speed this up by using a blow dryer or heat gun. Allow to fully cure (2-3 days) before heavy use.

How long the repair will last is dependent on many factors, including the traffic level of the area and on whether the repair is slightly recessed or not. However, we have found repairs to last many years with normal wear and tear.

Yes, Mix2Match VinylFix can be used on linoleum floors and will work on razor cuts providing that the damaged area is big enough for the putty to be pushed into.

Warm water will clean up excess putty, if the putty has hardened and water cleanup is not preferred, you can scrape the excess away.

The lacquer seals the repair making the repair durable and less susceptible to traffic, maintenance, and moisture, while giving it a nice finish. Layers of lacquer can help better match different sheen levels in a floor.

Yes.

How much this kit can repair is dependent on the length, width, and depth of the damage. The damaged area will need to be deep enough for putty to stick to. While there is enough putty in one tube to do about a 5"x4" repair (at minimum 1/16" deep), we don't recommend much larger than an inch by an inch. This is because it becomes difficult to disguise a repair bigger than that. The pigments are enough for multiple repairs as they are highly pigmented. Should you require more putty, please contact us.

For tile repairs we suggest using Mix2Match TileFix. The pigments in each Mix2Match Repair Kit can be used as a touch up paint in cracks and crevasses, however you will need to make sure to add in the lacquer to your tint mixture. The pigments by themselves will not stand up to surface traffic. How long the repair will last is dependent on many factors, including the traffic level of the area and on whether the repair is slightly recessed or not. However we have found repairs to last many years with normal wear and tear. tile floor.

Warm water will clean up excess putty, if the putty has hardened and water cleanup is not preferred, you can scrape the excess away.

The Mix2Match FloorFix can repair deep scratches and gouges where putty can be applied and stick. The surface scratches can be masked with CalFlor's Vinyl ScratchAway.

How much this kit can repair is dependent on the length, width, and depth of the damage. The damaged area will need to be deep enough for putty to stick to. While there is enough putty in one tube to do about a 5"x4" repair (at minimum 1/16" deep), we don't recommend much larger than an inch by an inch. This is because it becomes difficult to disguise a repair bigger than that. The pigments are enough for multiple repairs as they are highly pigmented. Should you require more putty, please contact us.

Repairs completely dry within 8-12 hours, however you can speed this up by using a blow dryer or heat gun. Allow to fully cure (2-3 days) before heavy use.

The lacquer seals the repair making the repair durable and less susceptible to traffic, maintenance, and moisture, while giving it a nice finish. Layers of lacquer can help better match different sheen levels in a floor.

The Mix2Match FloorFix is great for filling gaps if there is a large enough gap that the filler can be applied to. If the hole is deeper, you might want to apply a couple layers of plain putty 1st, then save the pigmented mixture layer for last.

Please visiteasyfloorrepairs.com for videos, tips, tricks and more to guide you through your repair.